Streifeneder Unternehmensgruppe

Turbocast

Material

  • Low-temperature polyester

Application

  • suitable for the production of temporary correction and positioning orthoses

Characteristics

  • activation temperature approx. 75 °C in the water bath, approx. 90 °C in the steam bath and approx. 100 °C in the IR oven
  • very good cutting, stretching and forming properties
  • can be modelled directly on the skin after a short cooling time to approx. 40 °C

Add to list
Dimensions L x W x H Colour Item-no.
- - -
600 x 410 x 0.8 mm beige 111P86/08
600 x 430 x 1.6 mm beige 111P86/16
600 x 440 x 2.0 mm beige 111P86/20
600 x 450 x 3.0 mm beige 111P86/30
600 x 450 x 4.0 mm beige 111P86/40
- - -
900 x 600 x 3.0 mm beige 111P860/30
900 x 600 x 4.0 mm beige 111P860/40
- - -
600 x 410 x 0.8 mm blue 111P89/08
600 x 430 x 1.6 mm blue 111P89/16
600 x 440 x 2.0 mm blue 111P89/20
600 x 450 x 3.0 mm blue 111P89/30
900 x 600 x 3.0 mm blue 111P890/30

Due to the special coatings there is no sticking to the skin and hair. Shaped material can be returned to its original state by reheating. For heating use water bath/steam bath item-no. 35M1/1 or infrared heating cabinet item-no. 51M10/3540.
Back