Streifeneder Unternehmensgruppe

Streifylen

Material

  • professional polyethylene-material for orthopaedic technology

Application

  • excellently suitable for manufacturing of night braces, positioning supports and corsets

Characteristics

  • Mouldable at approx. 120 °C (111P17/1
  • Mouldable at approx. 120-140 °C (111P17/2)
  • Mouldable at approx. 165-180 °C (111P17/3-111P17/8, 111P20/2-111P20/10)
  • weldable
  • deep drawable
  • very low material shrinkage
  • black Streifylen is slightly stiffer than white Streifylen due to the colour pigments

Add to list
Dimensions L x W x H Colour Item-no.
2000 x 1000 x 1 mm white 111P17/1
2000 x 1000 x 2 mm white 111P17/2
2000 x 1000 x 3 mm white 111P17/3
2000 x 1000 x 4 mm white 111P17/4
2000 x 1000 x 5 mm white 111P17/5
2000 x 1000 x 6 mm white 111P17/6
2000 x 1000 x 8 mm white 111P17/8
- - -
2000 x 1000 x 2 mm black 111P20/2
2000 x 1000 x 3 mm black 111P20/3
2000 x 1000 x 4 mm black 111P20/4
2000 x 1000 x 5 mm black 111P20/5
2000 x 1000 x 6 mm black 111P20/6
2000 x 1000 x 10 mm black 111P20/10

Depending on oven type, always use a clean PTFE-coating; talcum or aggressive cleaning aids (e.g. acetone) will damage the material surface. The dryer the model, the less material shrinkage is detectable.
Back