Streifeneder Unternehmensgruppe

Streifylast

Material

  • Polyethylene (PE-LD)

Application

  • excellently suitable for manufacturing of partially flexible orthoses, flaps and inserts
  • thin (1-2 mm) Streifylast/Trolen is often used also as foaming aid

Characteristics

  • Moldable at approx. 130-160 °C
  • deep drawable
  • can be welded at higher temperatures

Add to list
Dimensions L x W x H Colour Item-no.
2000 x 1000 x 1 mm milky-white 111P29/1
2000 x 1000 x 2 mm milky-white 111P29/2
2000 x 1000 x 3 mm milky-white 111P29/3
2000 x 1000 x 4 mm milky-white 111P29/4
2000 x 1000 x 5 mm milky-white 111P29/5
2000 x 1000 x 3 mm beige 111P30/30
2000 x 1000 x 4.5 mm beige 111P30/45

Depending on oven type, always use a clean PTFE-coating; talcum or aggressive cleaning aids (e.g. acetone) will damage the material surface. The dryer the model, the less material shrinkage is detectable.
Back